The beauty instruments of today are more advanced and complicated than the ones used in the past.
This means that they are more sophisticated but also more delicate and need to be handled with care.
For instance, the RF (radiofrequency) and EMS (electrotherapy) devices tend to accumulate dirt over time which can lead to malfunctioning or even permanent damage if not cleaned properly.
How to Clean RF and EMS Beauty Instrument?
These are 6 steps on how to clean RF and EMS Beauty Instruments:
1. Wash the instruments
Wash the instruments with soap and water or alcohol, then rinse in sterile water or alcohol.
2. Disinfect the instruments
Use a disinfectant such as Chlorhexidine Gluconate (CHG) or Iodophor to disinfect the instruments.
Rinse the instruments with sterile water or alcohol after using the disinfectant.
Use a rinse solution of 70% isopropyl alcohol (IPA) and 30% distilled water for instrument storage after disinfection.
4. Let dry
Dry the instruments by air-drying them for at least 4 hours before storage at room temperature.
6. Store the instruments
Store the instruments in a clean, dry location away from heat sources like radiators, sunlight, etc., that may damage them over time.
How Often Can You Use RF & EMS Beauty Instrument?
You can use the instrument every day, as long as you’re following a good cleaning routine and using it in moderation.
The frequency of your treatments will depend on how often your skin needs it—some people may need to use their device once or twice per week while others are okay with two treatments per month.
Try not to overdo it with the number of treatment sessions that you have, especially if you’re just starting out with this type of skin care treatment.
This is because overusing them could lead to irritation or even burns in extreme cases!
You should also take care when using these instruments: make sure that you don’t apply too much pressure when using them since this can cause damage to the instrument itself (and possibly yourself).
How Do You Use RF and EMS Beauty Instruments?
The procedure is simple:
1. Wipe the skin with alcohol & the electrode of RF beauty instrument
First, wipe the skin with alcohol.
Then, the electrode of RF beauty instrument or the probe of EMS beauty instrument is connected to the power source.
2. Switch on the instrument
After that, switch on the instrument and adjust the frequency and intensity to your skin type by pressing the button at the head of RF beauty instrument or EMS beauty instrument.
3. Use it on your face or body
Then, start to use it on your face or body according to your requirements and needs.
You can choose different modes for each part of your face or body: face mode for face; body mode for body; back mode for back; etc…
4. Make sure you don’t press too hard
During using it, make sure you don’t press too hard when pushing the electrode onto your skin since this may cause pain and injury on your skin instead of helping your skin look better and get firmer!
Pressing too hard also can cause damage to your skin! So make sure you don’t press too hard when using any kind of beauty instrument like RF Beauty Instrument or EMS Beauty Instrument!
5. Always wear gloves when using RF/EMS devices
Wear gloves when using RF/EMS devices or laser instruments to avoid contamination of the device with your body fluids, skin flakes or hair.
Can I Wash My Face After RF Treatment?
You can wash your face after the treatment, but not within 24 hours.
As a general rule, you should not use any products on your face for 24 hours after RF treatment.
I think the key takeaway from all of this is that you should always follow your practitioner’s instructions for using RF and EMS beauty devices.
They will have a better understanding of how your skin reacts to these treatments and can help guide you on what kind of products (or lack thereof) are best suited for you.