Self Tanning

What Not to Do When Self Tanning

2 Mins read

Self-tanning is a convenient way to achieve a sun-kissed glow without exposing your skin to harmful UV rays.

However, there are certain things you should avoid doing when applying self-tanner to achieve the best results. In this article, we will discuss what not to do when self-tanning.

Don’t Skip Exfoliation

Exfoliation is a crucial step in the self-tanning process, as it helps to remove dead skin cells and create a smooth base for the self-tanner.

Skipping exfoliation can result in patchy, uneven application and a less natural-looking tan. Before applying self-tanner, it’s important to exfoliate your skin thoroughly using a gentle scrub or exfoliating mitt.

Focus on rough areas like elbows, knees, and ankles, but be gentle to avoid causing irritation or redness.

Beware of Oils and Moisturizers

Oils and moisturizers can hinder the absorption of self-tanner and cause streaking or uneven application.

Avoid using thick lotions, oils, or body butters before applying self-tanner as they can create a barrier between your skin and the tanner. Instead, opt for a lightweight moisturizer that absorbs quickly or skip moisturizing altogether.

SEE ALSO:  Do Self Tanning Pills Work
What to UseWhat to Avoid
A lightweight moisturizerThick lotions
Aloe vera gelBody oils
Hydrating mistBody butters

Avoid Over-Application

Applying too much self-tanner can result in an unnatural, orange-toned tan that looks fake. Start with a small amount of tanner and work in sections, blending well with your hands or an applicator mitt.

Be careful around areas that tend to absorb more product, such as the elbows, knees, and ankles. If you notice streaks or unevenness, try blending with a damp cloth or exfoliating mitt to even out the color.

How to ApplyWhat to Avoid
Start with a small amount of productApplying too much product
Work in sectionsNeglecting hard-to-reach areas
Blend well with hands or mittSkipping the blending step

Say No to Scented or Colored Lotions

Scented or colored lotions can interfere with the color of your self-tanner and create an unnatural-looking tan. Avoid using scented lotions or perfumes before and after applying self-tanner, as they can alter the color or cause the tan to fade more quickly. Opt for unscented, color-free products to ensure the best results.

SEE ALSO:  How to Apply Self Tanning Mousse on Face

Don’t Rush the Process

Self-tanning takes time, and rushing the process can result in uneven application or streaks. Be patient and take your time when applying self-tanner, ensuring that you blend well and cover all areas evenly. Allow the tanner to dry for at least 10-15 minutes before getting dressed or going to bed to avoid staining your clothes or sheets.

Avoid Water Contact for Hours

Water can cause self-tanner to fade more quickly and create streaks or unevenness. Avoid showering, swimming, or sweating for at least 4-6 hours after applying self-tanner to ensure the best results. If you must shower or get wet, use a gentle, sulfate-free cleanser and avoid scrubbing your skin with a towel.

SEE ALSO:  Can You Go in the Sun After Self-tanning

Don’t Forget to Protect Your Hands and Feet

Your hands and feet are often the most neglected areas when it comes to self-tanning, but they can give away a fake tan quickly. Use a small amount of self-tanner on your hands and feet, blending well around the cuticles and between toes. To avoid staining your palms, wash them thoroughly with soap and water after applying self-tanner.

Stay Away From Tight Clothing and Fabrics

Tight clothing and fabrics can rub against your skin and cause self-tanner to rub off or transfer onto the fabric. Wear loose-fitting clothing after applying self-tanner to avoid staining and ensure that the tan sets properly. Avoid wearing light-colored fabrics until the tan has fully developed to prevent any transfer or staining.

By following these tips and avoiding common mistakes, you can achieve a natural-looking, flawless tan at home. Remember to be patient and take your time, and don’t be afraid to experiment with different application techniques to find what works best for you.